新闻资讯

Industry News

Company News

EPP material introduction

EPP material introduction

The outer wall of EPP particles is closed and the interior is filled with gas. Generally, the solid phase composition only accounts for 2%~10% of the total weight, and the rest is gas. The foaming material has the following characteristics:

22

2022

/

11

Performance and Application of EPP Material Mold

Performance and Application of EPP Material Mold

EPP has light specific gravity, good elasticity, shock resistance and compression resistance, high deformation recovery rate, good absorption performance, oil resistance, acid resistance, alkali resistance, resistance to various chemical solvents, non water absorption, insulation, heat resistance (- 40~130 ℃), tasteless, 99% recyclable, and almost no performance degradation. It is a truly environment-friendly foam. EPP beads can be molded into EPP products of various shapes in the mold of the molding machine.

22

2022

/

11

Warmly celebrate the launch of Nantong Dongke Mold Co., Ltd!

Warmly celebrate the launch of Nantong Dongke Mold Co., Ltd!

Warmly celebrate the launch of Nantong Dongke Mold Co., Ltd!

22

2022

/

11

Features and advantages of foamed polypropylene EPP products

Features and advantages of foamed polypropylene EPP products

The bending modulus of PP is about 1.52Gpa, while that of PE is only 207MGpa. The chemical resistance is similar to that of PE. Take the Ace type PP foamed material of Kogawa Electric Company in Japan as an example. Its mechanical properties, such as tensile strength and tear strength, are at the highest level of foamed plastic. Its compressive strength is lower than that of hard PUR and foamed PS, but higher than that of soft PUR. It has medium compressive strength.

06

2020

/

01

< 12 >